Avoid all these window installation mistakes to prevent expensive callbacks of experts.
If you want to end up with an energy-efficient, smooth operating, and long-lasting window, every step of the installation process needs to be executed with the greatest attention to detail.
Here are some of the most common installation mistakes and some useful tips that will help you avoid them.
Wrong size rough opening
The rough opening requirements for a 2’x 3’ double-hung window will vary depending on the manufacturer and the style of the window. A window can be built to fit almost any rough opening size, but many manufacturers build “standard” sizes that cost less than custom-built windows.
Wrong size jambs
When ordering windows with the jambs attached, be sure to add to the width of the jambs if the finished surface of the interior walls is going to be plaster, tongue, and groove, or any other material thicker than ½ inch drywall. You’ll also need to add to the width of a jamb when installing windows onto sheathing that is thicker than 7/16 of an inch.
Not sealing the nailing fins
In addition to sealing underneath the nailing fins, fins that are not an integral part of the window unit need to be sealed to the frame. The best way to accomplish this is to roll the flashing tape/membrane over the fin and up onto the edge of the window frame.
No back dam
A back dam on the sill will help prevent unwelcome water from reaching the wall cavity and the interior of the building. A back dam can be created with a strip of wood under the sill flashing, incorporated into a rigid sill pan, or could be created after the window is installed with a thick bead of sealant.
Not following the instructions
While all windows share similar installation procedures, most of them have unique requirements based on extensive laboratory and field testing. If you want to get the most out of every window you install and avoid expensive callbacks, it’s important to follow each of the manufacturer’s instructions down to the smallest detail.
Check out the full list of mistakes to avoid when you get replacement windows.

